SKU: 3035PICO Category: , Tag: ,

SHORT SLEEVE T-SHIRT V-NECK HIGH VISIBILITY

From: 16,00 Taxes not included

COMPOSITION: 100% Polyester
TYPE OF FABRIC: Breathable openwork
THICKNESS: 130 gr / m2

To add a custom logo Click here

 

DESCRIPTION:

  • Solid color high visibility short sleeve t-shirt.
  • Neck beak of the same fabric.
  • Short sleeve shirts, without strap.

Consult for other colors.


T-shirt HIGH VISIBILITY single color designed to protect the user in situations of low day and night visibility.
  • EN ISO 13688/13 Norm (General requirements for Protective Clothing): MEETS
  • Category according to EU Regulation 2016/425 (requirements on the design and manufacture of PPE to guarantee the protection of the health and safety of users): CATEGORY II
  • EN ISO 20471/13 standard (High Visibility protective clothing): CLASS 1
Material Class 3 Clothing Class 2 Clothing Class 1 Clothing
Background material 0,80 m2 0,50 m2 0,14 m2
Retroreflective material 0,20 m2 0,13 m2 0,10 m2
Combined material 0,20 m2

Sizing

At Multinormwear we adapt to your size needs with our multinorm garments.
We have a very wide size in our range of products:

  • From the usual sizes that go from the XS to 3XL
  • Range of extra-large sizes, ranging from 4XL to 7XL

DETERMINE YOUR SIZE:

This table will help you determine the size you are looking for.
Measure below the armpits, the most prominent part of your contour (chest, waist or hips).
Keep the tape measure horizontal and, in the table you will find the correspondence in size.

(Tolerance margin of + – 2 cm)

Reflective Bands

1) SEWED REFLECTIVE STRIP:

Fire retardant retroreflective material

The reflective tape we use is manufactured following strict quality control procedures and has been certified in accordance with the performance levels required by the standards. EN 471: 2003 (High visibility signaling clothing), ANSI / ISEA 107-2004 (High Visibility Safety Clothing) and EN 469: 2005 (Protective clothing for firefighters).

The tape is made up of different layers that allow you to combine a high level of reflectivity with good washing resistance, low temperature performance, abrasion resistance (according to the EN-471 standard) and limited flame spread (according to the definition contained in the EN-469 standard). The light reflective layer of this tape is composed of partially aluminized mbeads ™ and the substrate material is fire resistant polycotton.

Owns a excellent fastness to washing , has been tested to support 50 cycles washing at 60ºC and 5 dry cleaning cycles. It also features a very good resistance to heat and fire .

2) DISCONTINUOUS THERMAL FIXED BAND:

Reflective Material – Flame Resistant Band

This reflective material is designed for use in protective clothing that requires flame resistance. Used properly, this reflective material helps to improve user visibility in night conditions or low visibility when illuminated through the headlights of a vehicle, returning the light to the original source and reaching the driver’s eye.

It is composed of retroreflective lenses attached to an adhesive that is activated by heat. The band is 50.8 mm (2 inches) wide.

It is certified under the updated versions of EN ISO 20471 for High Visibility garments.

Recommendations

Recommended use of this PPE :

As PPE of Class 1 High Visibility, and taking as reference the table of recommendations in Annex A (informative) of the EN ISO 20471: 2013 standard, this garment is indicated for use by a passive user * located in an area of vehicle traffic whose speed is less than or equal to 30 km / h , which corresponds to a high risk category.

  • Achieving the performance of the garment requires that it be properly closed.
  • For full body protection, protective clothing should be worn closed and together with other suitable protective equipment.
  • Indicated for dangerous situations under any type of daylight and under the illumination of the headlights of a car in the dark.
  • Place the PPE on the body in such a way that the retroreflective bands and the fluorescent fabric are visible from the outside. It must not be hidden under another garment and / or accessory.

Recommendations against misuse:

  • This PPE should never be used against risks other than those described above.
  • Poor maintenance of the garments can modify their performance.
  • Dirty clothes can lead to a reduction in protection.
  • When the garment consists of two pieces, the user must wear them together to achieve the appropriate level of protection.
  • Tears must not be repaired by the user.

Storage: Store the garment avoiding unnecessary sun exposure and in dry places, protected from any aggressive agent.

Packaging: Plastic bag.

The garment has a shelf life of 1 year.

 

The high visibility properties of this garment are permanent, so the vThe useful life of the PPE will be a direct function of the use and care, so it can be used without prior limit as long as no evidence of its deterioration is observed. Despite this, its replacement is recommended after a period of one year of use.

Queries