FR + AT + EA + HV LONG SLEEVE POLO SHIRT

From: 45,70 Taxes not included

COMPOSITION: 59% Modacrylic, 39% Cotton, 2% Antistatic Fil.
THICKNESS: 210gr / m2

To add a custom logo Click here

 

DESCRIPTION:

  • Polo with Flame Retardant, Antistatic fabric, with Electric Arc protection and High Visibility.
  • Label with specific regulations on the bottom, left side.
  • Matching double placket with two fireproof buttons inside.
  • Reflective bands on the perimeter chest and sleeves.

Garment FIRE RESISTANT, ANTISTATIC, ELECTRIC ARC and HIGH VISIBILITY BICOLOR designed to protect the user against brief contact with heat and / or flames, for the dissipation of electrostatic charges accumulated in the body, protection against the thermal risks of an electric arc, and for situations of low day and night visibility.

Standard EN ISO 13688/13 (general requirements for Protective Clothing): COMPLIES

· Category according to EU Regulation 2016/425(requirements on the design and manufacture of PPE to guarantee the protection of the health and safety of users): CATEGORY III

Standard EN ISO 11612/15 (clothing for protection against heat and flames): A1-A2-B1- C1-F1

EN ISO 11612/15
ISO 17493:2000 Heat resistance to 180º COMPLIES: No ignition, no hole formation
Heat resistance to 260º COMPLIES: No ignition, no hole formation
A) ISO 15025:2002 Flame spread COMPLIES: Without post-combustion; No post-glow, no hole formation, no dripping.
B) ISO 9151:1995 Convective heat COMPLIES: Level B1 HTI12:4.17 HTI24:6.37
C) UNE-EN 366/94 Radiant heat COMPLIES: Level C1 t1:11.4 t2:19.2 t2-t1:7.8
F) ISO 12127:1996 Contact heat (250º) COMPLIES: Level F1 tt:8.7 sec
EN ISO 13938-1 Burst resistance COMPLIES: Resisted pressure 268kPa

 

Standard EN 1149-5 / 18 (protective clothing with electrostatic properties): COMPLIES

EN 1149-5:2018 ANTISTATIC
Value specified by norm Value obtained from the fabric
ELECTRICAL FIELD INTENSITY(S) >0.2 0.51
SEMI-DISSIPATION TIME (t50) <4 sec <0.01 sec

 

Standard IEC 61482 2: 2018 (protective clothing against the thermal risks of an electric arc): 4 kV – CLASS 1

Norm IEC 61482-1-2/18 Protective clothing against thermal risks of an electric arc (4 kA)
Test Minimum requirements Values obtained from knitting
Burn time < 5 sec. COMPLIES t<2 sec Class 1
No hole formation No hole formation COMPLIES Class 1
No fusion at the back No fusion at the back COMPLIES Class 1
No drip No drip COMPLIES Class 1
Correct STOLL per sample Correct STOLL per sample COMPLIES Class 1
Operational closure elements Operational closure elements COMPLIES Class 1
Accessories do not contribute negatively to results Accessories do not contribute negatively to results COMPLIES Class 1

 

Standard EN ISO 20471: 2013 (High Visibility protective clothing): CLASS 2

UNE-EN ISO 20471 NORM : High Visibility
Fluor background color surface Retro reflective material surface High Visibility Class
> 0.50 m2 > 0.13 m2 Class 2

Sizing

At Multinormwear we adapt to your size needs with our multinorm garments.
We have a very wide size in our range of products:

  • From the usual sizes that go from the XS to 3XL
  • Range of extra-large sizes, ranging from 4XL to 7XL

DETERMINE YOUR SIZE:

This table will help you determine the size you are looking for.
Measure below the armpits, the most prominent part of your contour (chest, waist or hips).
Keep the tape measure horizontal and, in the table you will find the correspondence in size.

(Tolerance margin of + – 2 cm)

Reflective Bands

1) SEWED REFLECTIVE STRIP:

Fire retardant retroreflective material

The reflective tape we use is manufactured following strict quality control procedures and has been certified in accordance with the performance levels required by the standards. EN 471: 2003 (High visibility signaling clothing), ANSI / ISEA 107-2004 (High Visibility Safety Clothing) and EN 469: 2005 (Protective clothing for firefighters).

The tape is made up of different layers that allow you to combine a high level of reflectivity with good washing resistance, low temperature performance, abrasion resistance (according to the EN-471 standard) and limited flame spread (according to the definition contained in the EN-469 standard). The light reflective layer of this tape is composed of partially aluminized mbeads ™ and the substrate material is fire resistant polycotton.

Owns a excellent fastness to washing , has been tested to support 50 cycles washing at 60ºC and 5 dry cleaning cycles. It also features a very good resistance to heat and fire .

2) DISCONTINUOUS THERMAL FIXED BAND:

Reflective Material – Flame Resistant Band

This reflective material is designed for use in protective clothing that requires flame resistance. Used properly, this reflective material helps to improve user visibility in night conditions or low visibility when illuminated through the headlights of a vehicle, returning the light to the original source and reaching the driver’s eye.

It is composed of retroreflective lenses attached to an adhesive that is activated by heat. The band is 50.8 mm (2 inches) wide.

It is certified under the updated versions of EN ISO 20471 for High Visibility garments.

Recommendations

Instructions for use:
This PPE has been conceived to protect the areas of the user’s body covered by it, against heat and flames, favor the dissipation of electrostatic charges from the body, avoid burns caused by an electric arc, and as a high visibility garment.
· Ground connection: The person wearing electrostatically dissipative protective clothing must be grounded, either by electrostatically dissipative footwear or by any other suitable means.
It should not be removed , or remove in the presence of flammable or explosive atmospheres, or when handling flammable or explosive substances.
For the protection of the whole body, protective clothing should be worn closed and as close to the body as possible, and with other suitable protective equipment. Clothing must be grounded to
through its direct contact with the user’s body or through a direct connection to ground.
The properties of heat and flame resistance, electrostatic dissipation, protection against the thermal risks of an electric arc, and the high visibility properties of this protective clothing can be affected by wear and tear, washing and possible contamination.
· The user should not put on any other garment unless it has the same properties of electrostatic dissipation, heat resistance, protection against electric arc, and high visibility as these.
Electrostatic dissipative protective clothing must permanently cover all non-dissipative materials during normal use (including bending and movement)

Recommendations against misuse:
·This PPE should never be used against risks other than those described above.
· Poor maintenance of the garments can modify their performance.
· Dirty laundry can lead to reduced protection.
· The tears must not be repaired by the user.
· Limits of use: This protective clothing must NOT be used in oxygen-rich atmospheres without the prior approval of the technician responsible for safety. This garment does NOT offer protection against electrical stress.

Washing recommendations:

MAX. 25 washes
· Washing at a maximum temperature of 30ºC.
· Bleaching is not allowed.
· Iron to 1 point.
· Dry cleaning is not allowed.
· Tumble drying is not allowed.

Storage: Store the garment avoiding unnecessary sun exposure and in dry places, protected from any aggressive agent.

The fire retardant, antistatic and high visibility properties of this garment are permanent, so the useful life of the PPE will be a direct function of use and care, so it can be used without prior limit as long as no evidence of deterioration is observed. Despite this, its replacement is recommended after a period of one year of use.

Queries