Add to selection
Multinorm twill shirt
SKU: ALSCAM 005 Category: , Tags: , , ,

MULTINORM FR + AT TWILL SHIRT

30,80€ Taxes not included

COMPOSITION: 80% Cotton, 19% Polyester and 1% antistatic fiber.
TYPE OF FABRIC: Taffeta 1/1
THICKNESS: 185 gr / m2

To add a custom logo Click here

 

DESCRIPTION:

  • Shirt with two pockets on the chest.
  • No bands
  • Flame retardant and antistatic fabric shirt.

Add to selection

FIREPROOF AND ANTISTATIC PROPERTIES:

This product has been manufactured following the requirements of the EU Regulation 2016/425, for its basic use, according to the standards:

· EN ISO 11612: 2015 Protective clothing against heat and flame.
EN 1149-5: 2018. Protective clothing with electrostatic properties.

PERMANENT FIREPROOF:

Performance levels according to EN ISO 11612: 2015:
Limited flame spread: A1
There is no destruction to the edges.
There is no hole formation.
There is no merger.
Post-glow time ≤ 2 s.
Post-combustion time ≤ 2 s.

Convective heat: B1
Performance level Intervals HTI24
Min Max
B1 4 <10
B2 10 <10
B3 <20
Radiant Heat C1
Performance level
 Intervals HTI24
Min Max
C1 7 <20
C2 20 <50
C3 50 <95
C4 ⋝95

PERMANENT ANTISTATICS:

Resistance to the accumulation of electrostatic charges according to EN 1149-5: 2018: S> 0.2 or t50< 4s

The person wearing electrostatic dissipative protective clothing must be properly grounded. The resistance
between the person and the ground must be less than 108Ω, eg through the use of suitable footwear.
• Electrostatic dissipative protective clothing should not be removed while in the presence of flammable or flammable atmospheres.
explosives or when handling explosive or flammable substances.
• The garment must be fully buttoned.
• The use of electrostatic dissipative protective clothing should not be done in oxygen-enriched atmospheres without approval.
prior to the security officer.
• The dissipative behavior of electrostatic-dissipative protective clothing can be affected by wear, tears,
washes and possible contamination.
• Electrostatic-dissipative protective clothing must permanently cover non-compliant materials during use.
normal (even in a crouched position and on the move).

Sizing

At Multinormwear we adapt to your size needs with our multinorm garments.
We have a very wide size in our range of products:

  • From the size 2XS to 4XL

DETERMINE YOUR SIZE:

This table will help you determine the size you are looking for.

Recommendations

Recommendations for use:

  • Indicated for industrial activities where the user is subjected to brief contact with a small flame. Convective heat with power less than or equal to 80 kW / m2
  • Radiant heat sources of power less than or equal to 20 kW / m². Heat by contact with surfaces at temperatures of 250ºC.
  • In the event of molten metal splash, the user must immediately leave the workplace and remove the garment. In case of splashing, if the garment is used next to the skin, it may not eliminate the risk of burns.
  • For the protection of the whole body, the protective clothing must be worn in a closed state and together with other suitable protective equipment against the same risks that PPE presents: pants, helmet with a face protection screen, protective gloves and boots. .
  • Environmental conditions and workplace hazards must be considered.
  • Achieving the performance of the garment requires that it be properly closed and adjusted.

 

Recommendations against misuse:

  • This PPE should never be used against risks other than those described above.
  • Poor maintenance of the garments can modify their performance.
  • Dirty clothes can lead to a reduction in protection.
  • Dirt or molten debris adhering to the garment can impair its performance.
  • Do not remove the garment when in explosive or flammable atmospheres or when handling explosive or flammable substances.
  • An increase in the oxygen content of the air can considerably reduce the flame protection of the garment.
  • The electrical insulation provided by clothing will be reduced if the clothing is wet, dirty, or soaked with sweat.
  • This garment does not protect the neck, legs, head, hands and feet.
  • The garment must not be worn with other garments under it, which are non-fire retardant and / or made of hot-melt material.
  • The tears must not be repaired by the user, a flammable thread or a probable part reactivatable with heat by fusion could be very dangerous in the case of an explosion by flame.

Maintenance:

  • Maximum washing temperature 60ºC.
  • Do not use bleaches.
  • Drum drying allowed. Normal temperature; maximum emission temperature 40ºC.
  • Ironing at the maximum temperature of the plate below 150ºC.
  • Dry cleaning not allowed.
  • Warning: In the event of accidental splashing of chemical or flammable liquids on clothing, the user should remove the clothing immediately, ensuring that no contact with any part of the skin occurs. Afterwards, the clothes must be cleaned and taken out of service.
  • Storage:Store the garment avoiding unnecessary sun exposure and in dry places, protected from any aggressive agent.
  • Packaging: Plastic bag.

Queries