M / SHORT ANTISTATIC T-SHIRT
From: 19,18€ Taxes not included
COMPOSITION: 49% Polyester, 49% Cotton, 2% Fil. AntistaticTYPE OF FABRIC: Point type "pique" or "granite"THICKNESS: 210gr / m2
To add a custom logo Click here
DESCRIPTION:
- Antistatic short sleeve t-shirt.
- Round neck.
- Chest pocket option.
Standard EN ISO 13688/13 (general requirements for Protective Clothing): Complies
Category according to EU Regulation 2016/425 (requirements on the design and manufacture of PPE to guarantee the protection of the health and safety of users): Category II
EN 1149-5/08 norm (protective clothing with electrostatic properties) Cumplies
| EN 1149-5:2018 ANTISTATIC | Value specified by norm | Value obtained from the fabric |
| ELECTRICAL FIELD INTENSITY(S) | >0.2 | 0.51 |
| SEMI-DISSIPATION TIME (t50) | <4 sec | <0.01 sec |
Sizing
At Multinormwear we adapt to your size needs with our multinorm garments.
We have a very wide size in our range of products:
- From the usual sizes that go from the XS to 3XL
- Range of extra-large sizes, ranging from 4XL to 7XL
DETERMINE YOUR SIZE:
This table will help you determine the size you are looking for.
Measure below the armpits, the most prominent part of your contour (chest, waist or hips).
Keep the tape measure horizontal and, in the table you will find the correspondence in size.
(Tolerance margin of + – 2 cm)
Recommendations
Instructions for use:
This PPE has been designed to facilitate the dissipation of electrostatic charges accumulated in the body.
· Ground connection: The person wearing electrostatically dissipative protective clothing must be grounded, either by electrostatically dissipative footwear or by any other suitable means. The resistance between the person and the earth must be less than 108Ω
It should not be removed , or remove in the presence of flammable or explosive atmospheres, or when handling flammable or explosive substances.
For the protection of the whole body, protective clothing should be worn closed and as close to the body as possible, and with other suitable protective equipment. Clothing must be grounded through direct contact with the wearer’s body or through a direct ground connection.
· The electrostatic dissipation and high visibility properties of this protective clothing can be affected by wear and tear, laundering and possible contamination.
· The user should not put on any other garment unless it has the same electrostatic dissipation, heat resistance and high visibility properties as these.
Electrostatic dissipative protective clothing must permanently cover all non-dissipative materials during normal use (including bending and movement)
Recommendations against misuse:
·This PPE should never be used against risks other than those described above.
· Poor maintenance of the garments can modify their performance.
· Dirty laundry can lead to reduced protection.
· The tears must not be repaired by the user.
· Limits of use: This protective clothing must NOT be used in oxygen-rich atmospheres without the prior approval of the technician responsible for safety.
Washing recommendations:
MAX. 25 washes
· Washing at a maximum temperature of 30ºC.
· Bleaching is not allowed.
· Iron to 1 point.
· Dry cleaning is not allowed.
· Tumble drying is not allowed.
Storage: Store the garment avoiding unnecessary sun exposure and in dry places, protected from any aggressive agent.
The antistatic properties of this garment are permanent, so the useful life of the PPE will be a direct function of use and care, so it can be used without prior limit as long as no evidence of deterioration is observed. Despite this, its replacement is recommended after a period of one year of use.